Muutoshistoria ohjelmalle System Information Viewer (SIV)

<<Takaisin ohjelman lataussivulle

Muutokset v5.36 - v5.38

Muutokset v5.35 - v5.36

Muutokset v5.34 - v5.35

Muutokset v5.33 - v5.34

Muutokset v5.31 - v5.32

Muutokset v5.30 - v5.31

Muutokset v5.29 - v5.30

Muutokset v5.28 - v5.29

Muutokset v5.27 - v5.28

Muutokset v5.26 - v5.27

Muutokset v5.25 - v5.26

Muutokset v5.24 - v5.25

Muutokset v5.23 - v5.24

Muutokset v5.22 - v5.23

Muutokset v5.21 - v5.22

Muutokset v5.20 - v5.21

Muutokset v5.19 - v5.20

Muutokset v5.18 - v5.19

Muutokset v5.17 - v5.18

Muutokset v5.16 - v5.17

Muutokset v5.15 - v5.16

Muutokset v5.14 - v5.15

Muutokset v5.13 - v5.14

Muutokset v5.12 - v5.13

Muutokset v5.11 - v5.12

Muutokset v5.10 - v5.11

Muutokset v5.0.9 - v5.10

Muutokset v5.08 - v5.0.9

Muutokset v5.07 - v5.08

Muutokset v5.06 - v5.07

Muutokset v5.05 - v5.06

Muutokset v5.04 - v5.05

Muutokset v5.03 - v5.04

Muutokset v5.02 - v5.03

Muutokset v5.01 - v5.02

Muutokset v5.00 - v5.01

Muutokset v4.53 - v5.00

  • Migrated from the SHA-1 to SHA-2 code signing. This has no real impact on most systems, but to use SIV V5 on W7 you need KB3033929 installed and on Vista x64 to disable Driver Signature Verification.
  • Added support for Windows 10 V10.00 Build 10074. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports].
  • Resolved race condition when -CRLCTL is being used that causes intermittent issues on some systems.
  • Added Synthetic Temperatures (Menu->Tools->Configuration->Synthetic Setup) so custom curves can use the highest reading of multiple sensors and/or this can be displayed on the [Status] panel.
  • Added initial Intel Core i7 (Broadwell-H) and Intel Atom (Braswell) reporting.
  • Added ASRock Z97 OC Formula, ASUS MAXIMUS VII GENE, P8B75, P8Z77-V, Gigabyte Z97X-UD3, MSI MS-7881, Supermicro H8DMU and X10DAX motherboard support.
  • Extended ASUS Rampage IV motherboard support for embedded controller temperature, fan speed and voltage reporting.
  • Added Nuvoton W83793G SMBus hardware monitoring support.
  • Added the -SINGLE command line qualifier specify that only a single instance of SIV should be active.

Muutokset v4.52 - v4.53

  • Enhanced the Corsair Link profile format to better allow for CL devices being added and removed. Existing profile data will be transparently changed to the new format but earlier versions of SIV will not use this revised profile information.
  • Enhanced [Link Fans] to easily enable all the fans to be set to a specified ratio (PWM) or speed (RPM). Added Corsair Link firmware image name for The H110iGT.
  • Changed System Power Usage to report the overall power rather than just the primary CPU power.
  • Added export support of SIV sensor information for GOverlay LCDSysInfo displays and the [GOverlay] panel.
  • Added the [CPU Export], [GPU Export], [PWM Export], [UPS Export], [Link Export] and [Sensor Export] panels to control what is exported by SIV. Revised Menu->System and Menu->Help to move rarely used entries into sub-menus. Added SENTEST.exe to test SIV sensor export.
  • Added nVidia Management Library (NVML) support to enable the reporting of Tesla K20c and similar GPUs.
  • Improved ASUS Z10PE-D8 WS motherboard reporting. Resolved issue with [IPI Delay] when running a 32-bit SIV on 64-bit Windows with > 32 CPUs per CPU Group.

Muutokset v4.51 - v4.52

  • Added support for Windows 10 V10.00 Build 9926. Enabled operation of [ACPI Buses], [ACPI Eval] and [ACPI Ports].
  • Added SMART reporting for Prolific Technology PL2773 USB to SATA Bridge attached Disk Drives.
  • Rationalised GPU reporting and resolved issue with the GPU-n Tool Tip on none nVidia/AMD GPUs. Allow for systems with AMD GPUs and have up to 64 displays.
  • Reworked the initial screen layout logic to better deal with an excessive number of Temperatures, Voltages and Fan Speeds.
  • Added re-initialisation of C-Link hardware about 30 seconds after resuming from sleep/hibernate when running in -CRLCTL mode. Updated [Link Fans] to workaround CL Mini, H110iGT, H100i and H80i manual feedback firmware issues when -CRLCTL is specified. Enhanced the [Link Status] dumps to report all instances of the data. Added reporting of Corsair AXi PSU -12 Volt information and support for the RM-Series PSU C-Link Adapter. Note that SIV will report RM-Series PSU information even when CL is active.
  • Added Nuvoton NCT6792D HWM, Intersil ISL6388 PWM sensor, EVGA 150-SE-E789, Gigabyte X99-SOC, MSI MS-7693 and MS-7888 motherboard support.
  • Added Ukrainian support. Workaround STATUS_DATATYPE_MISALIGNMENT issue within WinVerifyTrust() on Itanium.

Muutokset v4.46 - v4.51

  • Updated to use NVAPI R346 and report the GPU Video Clocks (NVAPI_GPU_PUBLIC_CLOCK_VIDEO).
  • Enhanced [Link Fans] to allow the temperature feedback sensor to be selected, but this currently this only works for CL Cooling Nodes and H100/H80 Coolers. I believe there are firmware issues with the CL Mini and H100i/H80i Coolers. Added initial H100iGT and H110iGT support. Updated HX1000i PSU support. Added the [link-dump] section to the save file which contains register dumps of all the devices listed on the [Link Status] panel.

<<Takaisin ohjelman lataussivulle