Muutoshistoria ohjelmalle NAS4Free (64-bit live CD)
<<Takaisin ohjelman lataussivulle
Muutokset v10.1.0.2.1454 Beta - v10.1.0.2.1557 Beta
- Changes:
 - Upgrade to FreeBSD 10.1 RELEASE p10.
 - Add Home, Insert, Delete, End, Page Up/Down, ctrl left/right keys to console.
 - Add Daap/Firefly advanced options.
 - Add aio_pthread streams_xattr acl_xattr.
 - Add zfsacl default setting.
 - Add inherit acls on SMB share.
 - Increase upload size in Webserver service up to 16GiB. (websrv_maxrequestsize)
 - Support aclinherit/aclmode ZFS properties.
 - Use crypt password instead of md5 value.
 - Upgrade tzdata to 2015d.
 - Upgrade mDNSResponder to 567.
 - Upgrade msmtp to 1.6.2.
 - Upgrade tmux to 2.0.
 - Upgrade php to 5.6.9.
 - Upgrade bash 4.3 to patch 39.
 - Upgrade samba to 4.1.18.
 - Upgrade nut to 2.7.3.
 - Upgrade jQuery to 1.11.3.
 - Fixes:
 - AFP share is not shown in Time Machine.
 - Translation to filechooser.
 - missing translation in OPT/LAN interface.
 - broken extension menu in filemanager.
 - AFP share is not shown in Time Machine.
 - missing libftdi in lcdproc.
 
Muutokset v9.3.0.2.1391 - v10.1.0.2.1454 Beta
- Changes:
 - Upgrade to FreeBSD 10.1 RELEASE p9.
 - Add Home, Insert, Delete, End, Page Up/Down keys to shell.
 - Upgrade php to 5.6.8.
 - Upgrade tzdata to 2015d.
 - Upgrade mDNSResponder to 567.
 - Upgrade msmtp to 1.6.2.
 - Fixes:
 - AFP share is not shown in Time Machine.
 
Muutokset v9.3.0.2.1480 - v9.3.0.2.1556
- Changes:
 - Upgrade to FreeBSD 9.3 RELEASE p14.
 - Upgrade to Samba4.1 and add SMB3 in WebGUI.
 - Convert to pkgng.
 - Ability to backup and restore the encrypted configuration.
 - Installation of system with GPT partition. (experimental)
 - Improved WebGUI under PHP 5.6.
 - Improved WebGUI with Chrome.
 - Improved config restore verbose output.
 - Improved ZFS pool usage/tool and import ZFS disks.
 - Improved ZFS pool import on embedded.
 - Improved HAST switch with net.inet.carp.preempt.
 - Improved PHP session handle.
 - Improved swap setting.
 - Replaced /dev/md0 with xmd using LZ4 compression.
 - Replaced the server certificate with 2048bits key and sha256 signature.
 - Change iperf2.x for iperf3.
 - Changed samba reload when changing the shares. (it takes few secs.)
 - Changed rootfs layout. (2GB USB/CF is required. Full is 4GB or more.)
 - Changed image files to use XZ.
 - Changed net.inet.tcp.delayed_ack to 1.
 - Changed boot with advskew=240 on master node. ("Switch VIP to MASTER" button will change the value)
 - Changed default Map to guest in CIFS/SMB is enabled.
 - Changed SMB send/recv buffer to 128480.
 - Drop SSLv3 support. (HTTPS must use TLS)
 - Drop LiveCD mode support with less than 2GB memory. (install/upgrade only). Supported minimum spec except LiveCD is 512MB memory + 512MB swap device or partition. 1024MB swap device or partition is recommended. File based swap and ZFS volume swap is not recommended.
 - Add ext2/ext3/ext4 detection when importing disk.
 - Add NFS v4 support.
 - Add tcpdump.
 - Add hostapd support. (wireless AP mode)
 - Add WLAN virtual interface used for wireless device. (OPT only at this time)
 - Add WebGUI access restriction.
 - Add NFS support in HAST service.
 - Add default swap of 512MB for LiveUSB and before user configuration.
 - Adjust number of Status|Processes.
 - Add MBR partition to LiveUSB.
 - Add log/mirrored log support in Disks|ZFS|Pools|Tools.
 - Add expires HTTP header. (some js must be force reloaded.)
 - Add 10.1 bge driver & NAS4Free bge wol patch.
 - Increase http upload size to 512MB.
 - Remove last slash of the path added by filechooser.
 - Add wait_on and spindown.
 - Upgrade e2fsprogs to 1.42.12.
 - Upgrade transmission to 2.84.
 - Upgrade isboot to 0.2.8.
 - Upgrade istgt to 20141125.
 - Upgrade smartmontools 6.3
 - Upgrade xmlstarlet to 1.6.1.
 - Upgrade mDNSResponder to 561.1.1.
 - Upgrade xmd to 0.4.4.
 - Upgrade bash 4.3 to patch 33.
 - Upgrade unison to 2.48.3.
 - Upgrade netatalk to 3.1.7.
 - Upgrade iperf3 to 3.0.11.
 - Upgrade inadyn-mt to 02.24.44.
 - Upgrade samba to 4.1.17.
 - Upgrade sipcalc to 1.1.6.
 - Upgrade nano to 2.4.1.
 - Upgrade rsync to 3.1.1.
 - Upgrade tzdata to 2015d.
 - Upgrade mDNSResponder to 567.
 - Upgrade msmtp to 1.6.2.
 - Upgrade php to 5.6.8.
 - Fixes:
 - Newly created AFP share is not shown in Time Machine.
 - Pool state on index.php is not a live state.
 - Can not mount(readonly) ext2/ext3/ext4 on GPT.
 - Remove ZFS pool cache in ZFS pool tools and sync.
 - FAT/NTFS mount does not use access restriction.
 - Broken Wireless support.
 - ZFS pool cache is not removed when deleting or reseting to factory default.
 - Missing /etc/uams/uams_randnum.so
 - Missing nutdrv_atcl_usb nut driver.
 - Never reject SMB3 and sendfile combination.
 - Failed to mount NTFS with read-only.
 - Missing mount_fusefs in /usr/local/sbin.
 - Missing usb device configuration file.
 - Missing default pkg repository.
 - mount_ntfs is not installed to /sbin.
 - Wrong variable in HAST script.
 - /boot/kernel/fuse.ko is missing.
 - /etc/platform is broken on full installation.
 - Some DHCP setting of WebGUI does not work.
 - xmlrpc is broken.
 - Missing GPT partition in Disks|ZFS|Pools|Tools.
 - Switching DHCP and static IP cause unexpected behavior.
 - Some drives can't get disk model/description.
 - The text on graph is not sized on Chrome.
 - Firmware page show incorrectly.
 - ntfs-3g is broken.
 - Form size is too small on Chrome.
 - HAST device is not imported by import disks.
 - Stop flooding "Unknown USB device" to syslog.
 
Muutokset v9.3.0.2.1391 - v9.3.0.2.1480
- Changes:
 - Upgrade to FreeBSD 9.3 RELEASE p13.
 - Upgrade to Samba4.1 and add SMB3 in WebGUI.
 - Convert to pkgng.
 - Ability to backup and restore the encrypted configuration.
 - Installation of system with GPT partition. (experimental)
 - Improved WebGUI under PHP 5.6.
 - Improved WebGUI with Chrome.
 - Improved config restore verbose output.
 - Improved ZFS pool usage/tool and import ZFS disks.
 - Improved ZFS pool import on embedded.
 - Improved HAST switch with net.inet.carp.preempt.
 - Improved PHP session handle.
 - Improved swap setting.
 - Replaced /dev/md0 with xmd using LZ4 compression.
 - Replaced the server certificate with 2048bits key and sha256 signature.
 - Change iperf2.x for iperf3.
 - Changed samba reload when changing the shares. (it takes few secs.)
 - Changed rootfs layout. (2GB USB/CF is required. Full is 4GB or more.)
 - Changed image files to use XZ.
 - Changed net.inet.tcp.delayed_ack to 1.
 - Changed boot with advskew=240 on master node. ("Switch VIP to MASTER" button will change the value)
 - Changed default Map to guest in CIFS/SMB is enabled.
 - Changed SMB send/recv buffer to 128480.
 - Drop SSLv3 support. (HTTPS must use TLS)
 - Drop LiveCD mode support with less than 2GB memory. (install/upgrade only)
 - Supported minimum spec except LiveCD is 512MB memory + 512MB swap device or partition.
 - 1024MB swap device or partition is recommended.
 - File based swap and ZFS volume swap is not recommended.
 - Add ext2/ext3/ext4 detection when importing disk.
 - Add NFS v4 support.
 - Add tcpdump.
 - Add hostapd support. (wireless AP mode)
 - Add WLAN virtual interface used for wireless device. (OPT only at this time)
 - Add WebGUI access restriction.
 - Add NFS support in HAST service.
 - Add default swap of 512MB for LiveUSB and before user configuration.
 - Adjust number of Status|Processes.
 - Add MBR partition to LiveUSB.
 - Add log/mirrored log support in Disks|ZFS|Pools|Tools.
 - Add expires HTTP header. (some js must be force reloaded.)
 - Add 10.1 bge driver & NAS4Free bge wol patch.
 - Increase http upload size to 512MB.
 - Remove last slash of the path added by filechooser.
 - Add wait_on and spindown.
 - Upgrade e2fsprogs to 1.42.12.
 - Upgrade transmission to 2.84.
 - Upgrade isboot to 0.2.8.
 - Upgrade istgt to 20141125.
 - Upgrade smartmontools 6.3
 - Upgrade xmlstarlet to 1.6.1.
 - Upgrade mDNSResponder to 561.1.1.
 - Upgrade xmd to 0.4.4.
 - Upgrade bash 4.3 to patch 33.
 - Upgrade unison to 2.48.3.
 - Upgrade netatalk to 3.1.7.
 - Upgrade iperf3 to 3.0.11.
 - Upgrade inadyn-mt to 02.24.44.
 - Upgrade samba to 4.1.17.
 - Upgrade sipcalc to 1.1.6.
 - Upgrade nano to 2.4.1.
 - Upgrade rsync to 3.1.1.
 - Upgrade php to 5.6.8.
 - Upgrade tzdata to 2015d.
 - Upgrade mDNSResponder to 567.
 - Upgrade msmtp to 1.6.2.
 - Fixes:
 - Newly created AFP share is not shown in Time Machine.
 - Pool state on index.php is not a live state.
 - Can not mount(readonly) ext2/ext3/ext4 on GPT.
 - Remove ZFS pool cache in ZFS pool tools and sync.
 - FAT/NTFS mount does not use access restriction.
 - Broken Wireless support.
 - ZFS pool cache is not removed when deleting or reseting to factory default.
 - Missing /etc/uams/uams_randnum.so
 - Missing nutdrv_atcl_usb nut driver.
 - Never reject SMB3 and sendfile combination.
 - Failed to mount NTFS with read-only.
 - Missing mount_fusefs in /usr/local/sbin.
 - Missing usb device configuration file.
 - Missing default pkg repository.
 - mount_ntfs is not installed to /sbin.
 - Wrong variable in HAST script.
 - /boot/kernel/fuse.ko is missing.
 - /etc/platform is broken on full installation.
 - Some DHCP setting of WebGUI does not work.
 - xmlrpc is broken.
 - Missing GPT partition in Disks|ZFS|Pools|Tools.
 - Switching DHCP and static IP cause unexpected behavior.
 - Some drives can't get disk model/description.
 - The text on graph is not sized on Chrome.
 - Firmware page show incorrectly.
 - ntfs-3g is broken.
 - Form size is too small on Chrome.
 - HAST device is not imported by import disks.
 - Stop flooding "Unknown USB device" to syslog.
 
Muutokset v9.3.0.2.1349 - v9.3.0.2.1391
- Changes:
 - Upgrade to FreeBSD 9.3 RELEASE p13.
 - Upgrade to Samba4.1.x now supports SMB3 in WebGUI.
 - Convert to pkgng.
 - Ability to backup and restore the encrypted configuration.
 - Installation of system with GPT partition. (experimental)
 - Improved WebGUI under PHP 5.6.
 - Improved WebGUI with Chrome.
 - Improved config restore verbose output.
 - Improved ZFS pool usage/tool and import ZFS disks.
 - Improved ZFS pool import on embedded.
 - Improved HAST switch with net.inet.carp.preempt.
 - Improved PHP session handle.
 - Improved swap setting.
 - Replaced /dev/md0 with xmd using LZ4 compression.
 - Replaced the server certificate with 2048bits key and sha256 signature.
 - Change iperf2.x for iperf3. (iperf commands changed! now use iperf3 command)
 - Changed samba reload when changing the shares. (it takes few secs.)
 - Changed rootfs layout. (2GB USB/CF is required. Full is 4GB or more.)
 - Changed image files to use XZ.
 - Drop SSLv3 support. (HTTPS must use TLS)
 - Drop LiveCD mode support with less than 2GB memory. (install/upgrade only). Supported minimum spec except LiveCD is 512MB memory + 512MB swap device or partition. 1024MB swap device or partition is recommended. File based swap and ZFS volume swap is not recommended.
 - Add ext2/ext3/ext4 detection when importing disk.
 - Add NFS v4 support.
 - Add tcpdump.
 - Add hostapd support. (wireless AP mode)
 - Add WLAN virtual interface used for wireless device. (OPT only at this time)
 - Add WebGUI access restriction.
 - Add NFS support in HAST service.
 - Add default swap of 512MB for LiveUSB and before user configuration.
 - Adjust number of Status|Processes.
 - Add MBR partition to LiveUSB.
 - Add log/mirrored log support in Disks|ZFS|Pools|Tools.
 - Add expires HTTP header. (some js must be force reloaded.)
 - Add 10.1 bge driver & NAS4Free bge wol patch.
 - Increase http upload size to 512MB.
 - Remove last slash of the path added by filechooser.
 - Add wait_on and spindown.
 - Upgrade e2fsprogs to 1.42.12.
 - Upgrade transmission to 2.84.
 - Upgrade isboot to 0.2.8.
 - Upgrade istgt to 20141125.
 - Upgrade smartmontools 6.3
 - Upgrade xmlstarlet to 1.6.1.
 - Upgrade mDNSResponder to 561.1.1.
 - Upgrade xmd to 0.4.2.
 - Upgrade bash 4.3 to patch 33.
 - Upgrade unison to 2.48.3.
 - Upgrade netatalk to 3.1.7.
 - Upgrade iperf3 to 3.0.11.
 - Upgrade samba to 4.1.17.
 - Upgrade zoneinfo to 2015b.
 - Upgrade php to 5.6.7.
 - Upgrade nano to 2.4.0.
 - Fixes:
 - Can not mount(readonly) ext2/ext3/ext4 on GPT.
 - Remove ZFS pool cache in ZFS pool tools and sync.
 - FAT/NTFS mount does not use access restriction.
 - Broken Wireless support.
 - ZFS pool cache is not removed when deleting or reseting to factory default.
 - Missing /etc/uams/uams_randnum.so
 - Missing nutdrv_atcl_usb nut driver.
 - Never reject SMB3 and sendfile combination.
 - Failed to mount NTFS with read-only.
 - Missing mount_fusefs in /usr/local/sbin.
 - Missing usb device configuration file.
 - Missing default pkg repository.
 - mount_ntfs is not installed to /sbin.
 - Wrong variable in HAST script.
 - /boot/kernel/fuse.ko is missing.
 - /etc/platform is broken on full installation.
 - Some DHCP setting of WebGUI does not work.
 - xmlrpc is broken.
 - Missing GPT partition in Disks|ZFS|Pools|Tools.
 - Switching DHCP and static IP cause unexpected behavior.
 - Some drives can't get disk model/description.
 - The text on graph is not sized on Chrome.
 - Firmware page show incorrectly.
 - ntfs-3g is broken.
 - Form size is too small on Chrome.
 - HAST device is not imported by import disks.
 - Stop flooding "Unknown USB device" to syslog.
 

